Begin Reverse Lane Sign - R3-9h

R3-9h Begin Reverse Lane Sign

Reflective Sheeting on Aluminum

Radius Corners

3/8" Prepunched Holes

High Intensity and Diamond Grade Meet DOT and MUTCD State and Federal Guidelines

MUTCD Information:  A Reversible Lane Control sign shall be mounted over the center of the lane that is being reversed and shall be perpendicular to the roadway alignment. If the vertical or horizontal alignment is curved to the degree that a driver would be unable to see at least one sign, and preferably two signs, then additional overhead signs shall be installed. The placement of the signs shall be such that the driver will have a definite indication of the lanes specifically reserved for use at any given time. Special consideration shall be given to major generators introducing traffic between the normal sign placement. Transitions at the entry to and exit from a section of roadway with reversible lanes shall be carefully reviewed, and advance signs shall be installed to notify or warn drivers of the boundaries of the reversible lane controls. The R3-9g or R3-9h signs shall be used for this purpose.