Traffic Signs New York
Traffic Signs - All USA Manufacturing and Shipped to New York State
Welcome to Traffic Signs - New York
TrafficSigns.com brings a full selection of High Quality Traffic Signs for customers throughout New York State. Wether you need a parking sign, road or street signs in NY we can help. From stop signs to New York handicap signs, standard or custom traffic sign we have what you need for for immediate delivery to New York.
Our HIP and DG3 reflective aluminum traffic signs meet MUTCD requirements and NYSDOT (New York State DOT) standards.
Do not hesitate to call one of our professional sales representatives at Traffic Signs Corporation to order your standard or custom Traffic Signs.
-
Regulatory Traffic Signs
Regulatory Traffic Signs Stop Signs, Yield Signs, Speed Limit, Do Not Enter, Handicapped, One Way Si
-
Parking Signs
Parking Signs, No Parking Signs, Visitor Parking, Handicapped Signs, Permit Only, Property, Reserved
-
Traffic Warning Signs
Object Markers, Railroad Signs, Curve, Crossing Signs, Dead End, Advisory, Speed Bump, Warning Signs
-
Construction Signs
Construction, Road Work Ahead, Flagger Signs, Utility Work, Survey Crew, Loose Gravel, Lane Ends
-
School Signs
School Area Signs, Crossing Signs, Slow Children, Campus Signs, Bus Safety, Pedestrian Crosswalk
-
Street Name Signs
Street Name Signs, Street Sign Brackets, Tubular Posts, No Outlet, Crosspieces, D3-1
-
Custom Traffic Signs
Custom Traffic and Parking Signs, Reflective Aluminum Signs, Standard Sized Custom Signs
-
Hardware & Posts
Channel Posts, Tubular Posts, Square Posts, Post Clamps, Brackets, Pavement Markers, Base and Standa
-
Guide Signs
Guide Signs direct travelers to the right exit for cities, airports, roadways & other destinations
-
Roll-Up Signs & Stands
Bone Construction Roll up signs, Bone safety sign stands, reflective roll up signs
-
Cones Drums Barricades
Best Quality Traffic Cones, Channelizer Cones, Flashers, Safety Lights, Cone Lights, Drums and Barri
-
Traffic Sign Materials Guide
|
Engineer Grade
|
 |
|
High Intensity Prismatic
|
 |
|
Diamond Grade
|
 |
Science of Retroreflectivity
Retroreflective signs help address nighttime driving safety issues such as older drivers, glare, visual clues and driver expectations. Upcoming MUTCD standards are structured around basics of sheeting retroreflectivity. The fundamental question was how to relate "standard retroreflectivity" to visibility of traffic signs:
Lighting parameters ...
Headlights emit light measured in candelas (intensity [cd]) When the beam from a headlight strikes the sign surface, the amount of light meeting the surface is measured in lux (illuminance) When this light is reflected toward an observer, the observer sees brightness, or luminance, measured in candelas per meter squared (cd/m2) Coefficient of retroreflection is the ratio of this luminance or brightness to the illuminance (RA = cd/m2/lux)
Retroreflection: A special type of reflection where incoming light is returned toward its source.
Entrance Angle: This is a measure of how the light is entering the sign. If the light is entering the surface perpendicularly, the entrance angle is zero. Observation Angle: This is the angle between the illumination path (from a headlight to the sign) and the observation path (from driver eye to the sign). In a sense, it is the measure of separation of the driver’s viewpoint from a headlight.
Coefficient of retroreflection (RA) is a measure of retroreflective efficiency of a retroreflector at a specific set of entrance angle and observation angle, which specifies one certain viewing geometry. Minimum retroreflectivity requirements refer strictly to 0.2 degree observation angle and -4 degree entrance angle. Retroreflective efficiency: The percent of light returned back toward its source by a retroreflector. Typically, beaded sheetings have 7% to 14%, truncated cube microprismatic sheetings have about 32%, and a full-cube sheeting has 58% retroreflective efficiency. There is no direct correlation between the retroreflective efficiency and ASTM sheeting types.
15 Traffic sign retroreflectivity "sign retro 101", FHWA Visibility Team PowerPoint
Owners or parties responsible for such private roads have two years from the date of the ruling (January 17, 2007) to bring traffic control devices into compliance with the MUTCD and other applicable State Manuals.
TrafficSigns.com is a supplier of traffic signs, parking signs, regulatory signs, and much more to the State of New York
-
Buffalo
-
Rochester
-
Yonkers
-
Syracuse
-
Albany
-
New Rochelle
-
Mount Vernon
-
Schenectady
-
Utica
-
White Plains
-
Hempstead
-
Niagra Falls
-
Troy
-
Binghamton
-
Freeport Village
-
Valley Steam Village
-
Rome
-
Long Beach
-
Poughkeepsie
-
North Tonawanda
Categories
|
|
|
|
|
|
 |
